Good I need help I have a serious problem that does not let me play

[FireandBlood]

If I try in window mode … without borders … executing as administrator … removing it from the firevalll just in case of the antivirus ect … remove the visual effects of windows the majority, the screen I set to 60 hz also run it with the high performance power bread and in normal and nothing and tried all the possible configurations even from the nvidia panel of the controllers … And the only thing that installs in geforce experiential customization and then unleash geforce experiencie I only have the card screen drivers so haware conflict problem is not …

I’m going to test the configuration with MSI Afterburner if it works, hopefully it works I pray xD

[MattP598]

I wouldn’t worry about geforce experience… I have games missing stuff in their all the time for some reason. Did you actually try and run it in windows mode? If you did, cool, it was just a suggestion. One other thing I should of probably mentioned that it wouldn’t hurt todo anyway just in case heat is an issue is to go backinto aftreburner settings and click on the fan tab. check the box to enable user defined settings or whatever and just increase your fan graph a little bit at each notch. I start mine at 60 and by the time it gets to 80 degrees I’m at 100 percent. A little fan noise doesn’t bother me… I’m usually playing with headphone anyway. You’ll also want to uncheck where it says auto on the fan slider.

You might also want to do a google search on your card and see what other people have been able to overclock it to just for reference. Just because someone was able to increase their core by 150 doesn’t mean you will be able to but it will kinda give you a reference. For instance I’ve gotten mine up to about +120 on the core and +500 on the memory. Some people have been able to oc their gtx 1070 by 200 but the version i got already has a built in boost to about 1800MHz so technically my total OC is almost 300MHz.

[FireandBlood]

MHz

Well I uploaded it to 50 MHz and run the game and nothing will prove the second configuration
is

Core voltage 100 (the maximum)

power limit 100 (does not go up to 125 even if you configure the other two things)

core clock 10

memory clock 0

these adjustments?

[FireandBlood]

had to reduce 50 MHz or increase? I say it because I executed the game by increasing 50MHz in case it was the other way …

[MattP598]

Oh uncheck the link button next to power and temp limit and it will let you set the power higher without increasing the temp.

But first start out by leaving those alone and lowering the Core clock by 50MHz.

[FireandBlood]

Hello I have not been lucky probe the configuration of MSI Afterburner and nothing … also probe several things with what I could realize that the error is only in a zone … if in an area … … not in a mission or in the game … but in a specific zone the camp and the forest of Talmberg … The other forests and the other parts of the map can go with medium graphics and even the textures in high and I’m going to 30 fps and I do not get that error and in the Talmberg forest camp if I do not understand … it is to arrive at the camp without even having started the mission and it does not last me 10 minutes computer gives me the error but in other parts of the map does not give that error for example in the city that is going to 23 fps with graphics in the middle and textures in high and that mistake does not throw me or the southern forest … When I get that error I have to restart the computer running and when I start it again I always get 2 notifications (the access of the kindomcome.ex application to graphi c hardware has been blocked) and (error when starting the screen driver; instead, the basic microsoft screen driver will be used. check windows update to get to newer screen driver.) I also have to say that if under the graphics the error takes to reproduce later but it still occurs in the forest of Talmberg. It takes longer but occurs … rare is that ONLY in that part of the map I get the error … But I think that since I found the error in the event viewer, the first error I get is:

1: The nvlddmkm screen driver stopped responding and recovered successfully. (at the time 0:37:18 here is when I get a black screen)

2: The KingdomCome.ex application access to graphic hardware was blocked. (At the time 0:37:18 this is the one that follows that I do not understand the one that has been blocked)

3: The application-specific permission setting does not grant the Local Activation permission for the COM server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user ZAXONEMESIS \ Zaxon with SID (S-1-5-21-2931946106-3262668943-3135359594-1001) in the LocalHost address (with LRPC) running in the application container with SID Not available (Not available). This security permission can be modified through the Component Services administrative tool. (at the time 0:37:18 this is the one that I think is getting the error if I do not explain it to me)

4: Application name with errors: dwm.exe, version: 10.0.17134.1, timestamp: 0xf5178e97
Module name with errors: unknown, version: 0.0.0.0, timestamp: 0x00000000
Exception code: 0xe0464645
Displacement of errors: 0x0000000000000000
Process identifier with errors: 0x1124
Start time of the application with errors: 0x01d46a57d0909be0
Application path with errors: C: \ WINDOWS \ System32 \ dwm.exe
Module path with errors: unknown
Reporting ID: 89fa4232-5e8c-43c7-bbc6-9dac6df8e9b1
Full name of the package with errors:
Relative application identifier of the package with errors:
(at the time 0:37:30 this error gives me much later so I guess it has no relation since at this time I was given the black screen)

This picture is with MSI Afterburner with the lowest resolution and with graphics on bass and I gave the error after a while

This picture is with MSI Afterburner but without adjusting it … and with a higher resolution and most graphics in medium and high textures and in the city I did not get the error

Then I went from the city with the adjustments in medium / high to this point and I was like more than half an hour wandering through the forest to have the error … and I did not have any error all perfect

from the forest I went to NEUHOF to steal a horse to go to the hunting camp where the error occurs in the forest of Talmberg without having started the mission

And I went to the camp and POOM gave me the error as soon as I entered the camp and went to the camp forest, something has that forest that does not want me to play and it is fucking me a lot

[Whitedragem]

This seems to be where troubleshooting has taken us…

If all others variables check out- well done for the effort; gather motivation is high.

Definayely dont let geforce experience run on your pc, at all, especially after a DDU proper wipe.
Geforce experience is running other peoples settings on your PC. A gtx1030 is not a great card to trust with other users settings. (Id run ot at 1280x720 as my max resolution).

In fact, set game to 1280x720 low details and see if it loads that zone…
It could be a card communication hiccup: gpuz reports pcie 1.1
. Yes it is at x4… the bandwidth ‘times four’ of pcie 2 or 3 is good enough, but not pcie1.
The ddr5 gt1030 moght want to be in a ‘higher’ slot.

Not a definate fix
(Slight chance),…
But should be remedied if ‘incorrect’. (Computer says… ‘no’)

[FireandBlood]

the problem has not been solved I do not understand the truth but I have been looking for there and I saw someone who had the same thing but with different specifications … I do not know if it will be the same problem that I have but it seems to me that apparently I configure something of the bios and it is fixed to him it is possible that I have to do the same ¿?

The link to the problem is here http://www.tomshardware.co.uk/answers/id-2711109/system-crash-gaming-requires-hard-reset-day.html

a copy of the supposed solution
BEST ANSWER
furkandegerJul 10, 2015, 11:51 PM
rubix_1011 said:
I’m running out of ideas, as well. Given that you’ve encountered this primarily when you’ve overclocked, it could indicate a power supply or motherboard with failing power delivery, but you’ve also encountered it when not overclocking…which could still indicate the same, but I would expect consistencies in some form if that were the case.

MemTest86+ is pretty quick to sort out if you have a bad stick, so you shouldn’t have to run for hours, but it is the most complete when you run it that long. Usually it will find a bad stick within a few minutes. Did you MemTest on all your DIMM slots on the motherboard, as well? I’ve seen motherboards that have bad DIMM slots but the RAM sticks were all good.

Guys, I cannot thank you enough for your support during this period.

I think I can finally confirm that I solved my issue.

Of all the things I tried, I rolled back whatever setting I changed and tested after every change. Turns out, what fixed this for me was actually PCI-E frequency. Just set it back to 100 and I got the crash again. And set it once again to 110, no crashes. Reverted NB voltage back to auto and no problems. I had also connected two seperate PCI-E power cables to the gpu and now I have connected it normally and still no problems. However whenever I set PCI-E frequency to 100 mhz from bios, I can get the crash. When it is 110, there isn’t one.

I will be testing in the upcoming days to be completely sure, however I think I can say the problem is gone.

YET, there is something I wonder… In my particular case, what causes this? Is it because GPU is faulty/defected/whatever that it needs a PCI-e frequency of 110 mhz or is it mobos fault for not being able to support my graphics card’s needs with 100 mhz of PCI-e frequency?

I will RMA my mobo in any case since its integrated sound chip has fried apparently, however I am not sure whether I should RMA my gpu or not. I mean, yes it won’t hurt to RMA it anyway, but I just wonder. What do you think?

[Whitedragem]

Before further ado
do sort out the pci e slot

The card thinks its a pcie 1 slot
Either bios or move card up towards slot nearest cpu

It will sort out bandwidth (in a weird way not unlike setting 110, rather than 100:I doubt they’d be related)

Do so first cause it could lead to weird issues with card as it wouldnt be operating at a system level as driver makers would be expecting…

Pci e3 or even 2 gens have vastly more bandwidth.

Edit: dont forget to remove pc power cable and card.
Card shouldnt need extra cooling - passive model exist that a measure cooler VRM temps (other bit of card than runs hotter than the ‘gpu’ temp measured and shown in most monitoring rigs.) 1030s are very fine fabrication chips and these run cool.
60s degree ish seems to be their high temp that they all run at fan or no fan.

[MattP598]

Another thing to try… Download this tool and run it… Make sure to follow every step closely. It’s an amazing free tool that will fix tons of issues on your PC…

https://www.majorgeeks.com/files/details/tweaking_com_windows_repair.html

[HerrVollwertkost]

Just chiming in to say that I currently experience the very same problem. I started a topic of my own and reported the problem via email.
Here is my thread

Oddly enough, I’m at the exact same point in the questline: Rabbit hunting with sir Hans. Something about that forest smells funky. So far I wasn’t able to find a solution to the problem; performance-wise everything should be fine (you can see my specs in the linked thread). Maybe together we can shed some light on this. Ask away in case you want to know anything.

EDIT: Like the person in the last post by FireandBlood, I use a FX-8350. Might be relevant, although for that person it seems like the motherboard or mobo interaction with GPU was the culprit.

[HerrVollwertkost]

Another post on a very similar topic.

Here, the problem was solved by using another PCI-E slot and securing the 6pin power cable to the graphic card, which seemed to be wonky.

[FireandBlood]

then the problem is of the bios configuration? or the site where is the connected graphic card? … I’m sorry for asking so much I do not know very well everything … I’m going to upload a photo with the bios configuration and how it’s connected the graphic card …

[Whitedragem]

Just check which slot the card is in… (is it slot closest cpu/RAM, like it should be…)

If the video card is seated in the mainboards first pci-e slot, then it is likely just a bios setting to allow the card to function in pcie2 or version 3 modes…

[FireandBlood]

There is only one card slot … I pray that it is a bios configuration I upload the photos of how it is configured …

[FireandBlood]

[FireandBlood]

enabled is habilitado

Disabled is Inhabilitado

So that you understand it if it is not understood that it is in Spanish

[FireandBlood]

Also in my PCELE specifications the speed now that you say it is abnormal no? I upload a photo of what I found …

Places :

The plate indicates that it supports:
PCI-Express x4 v3.0

Currently the speed is:
PCI-Express x4 v1.1

It’s possible that’s why?

[HerrVollwertkost]

Judging from the foto you uploaded the position of the card should be fine.

I did some more googling and problems like this are somewhat frequent - there is barely a common denominator though. Some suggest its RAM, some suggest it’s the motherboard, for others it’s the CPU or even power supply.
I was mainly searching for “system crash gaming hard reset” and that yields a lot of results.

[FireandBlood]

The strange thing is that the error only happens to me in that part of the map … In the cities and towns ect ect that error does not come out … it is going to the forest of Talmberg with configuration the high and the error occurs … in other parts of the map does not occur … even in other forests like the south does not happen … I checked it several times … the error has only come out in this game in others never happened to me … The drivers and all things are at their latest version … and reinstalled the game several times and executed in several versions … Until corrected up to several problems of windows between one of them was that the computer eva a little lag me to start session because thanks to try to fix this error solved this problem xDD something good and removed … … I do not have external applications open when playing the game … I’ve tried almost everything and nothing …